FujiFilm Pivi MP-300 User Manual

Page 14

rin

tin

Printing

Select the image on the

mobile phone.

PRINTING - Infrared communication -

x The location of the mobile phone’s infrared port, its operation procedure and

the text displayed on the screens all differ depending on the particular model
used. Refer to the owner’s manual for your phone.

x Refer to the owner’s manual for your mobile phone for information on how to

send images from the mobile phone.

Infrared

transmission

Rotate image

Delete image

c Sample mobile phone screens.

Confirm the transmission (YES)

to begin sending the image.

Send infrared
transmission?

/ N O

Y E S

Sending

Select infrared transmission.

x On some models, the image cannot

be sent if it is displayed at full size.
If so, return to the thumbnail or
list mode and then select infrared
transmission.

Sending images from a camera phone

The MP-300 supports IrDA high-speed communication (IrSimple/FIR). This
provides faster connection speeds and shorter transmission times when the image
is sent from a compatible device.

Main image
sizes (pixels)

High-speed infrared communication (IrSimple/FIR)

Infrared
communication
(IrDA / SIR)

Unidirectional

Bidirectional

VGA (640×480)

Approx. 0.3 sec.

Approx. 19 sec.

1M (1280×960)

Approx. 1.3 sec.

Approx. 1.4 sec.

Approx. 75 sec.

3M (2048×1536)

Approx. 1.7 sec.

Approx. 1.8 sec.

Approx. 100 sec.

5M (2592×1944)

- (

Approx. 4.7 sec.

Approx. 160 sec.

c The MP-300 cannot print ordinary images with a file size larger than 1 MB.
x The times given here are purely a guide. Actual times differ depending on the

performance of the sending device (primary node).

x Transmission times vary depending on the fi le size and the type of sending

device used.

x The transmission time will be longer if an image with a large fi le size is sent.

For the best balance between data transmission times and image quality,
images should be photographed at VGA-size (640

480).

x Depending on the model of the sending device, it may not be possible to

shoot images at VGA-size and then send the images via infrared.

◆

Recommended image sizes for transmission

◆

Examples of camera phone infrared port locations

Guide to image sizes and transmission times

x For information on the location of the infrared port on the sending device (digital

camera, PC, PDA, etc.) and on the image transmission procedure, refer to the
owner’s manual for the sending device.