FUJITSU fi-5015C - Manual (Page 25)

fi-5015C Image Scanner Getting Started
AP-5
Appendix3
REPLACING CONSUMABLES
■ Consumables and Replacement
Cycle
The followings are the specifications of consumables
and their recommended replacement cycles.
To purchase consumables, contact the store where you
purchased the scanner or an authorized FUJITSU scanner
service provider.
The replacement cycles above are rough guidelines
when using the following type of paper:
Woodfree paper or Plain paper.
This cycle varies according to the type of the used paper
and how frequently the scanner is used and cleaned.
The following illustrations show the locations of the
consumables. Refer to "Chapter 4 Replacing Consum-
ables" fi-5015C Operator’s Guide on the Setup
CD-ROM.
■ Replacing the Pad ASSY
■ Replacing the Pick Roller unit
WARNING
During its operation, the inside
glass of the ADF becomes very
hot .
Before replacing the
consumables, turn its power off
and unplug the AC adapter from
the outlet. Wait at least
15 minutes.
Description Parts No.
Standard
Replacement Cycle
Pad ASSY PA03209-
0550 After 20,000 scans or
one year
Pick roller unit PA03209-
0551 After 100,000 scans or
one year
ATTENTION
Use only the specified consumables.
Pad ASSY