FUJITSU fi-5015C - Manual (Page 13)

fi-5015C Image Scanner Getting Started 5
6. When the [InstallShield Wizard Complete] win-
dow appears, click [Finish].
For FUJITSU ISIS Scanner Driver
■ Preparation
Take out the Setup CD-ROM from its package, but do
not insert the Setup CD-ROM into the CD drive yet.
■ Installing the FUJITSU ISIS
Scanner Driver
1. Turn your PC on and log on to Windows.
2. Insert the "Setup CD-ROM" into the CD drive.
⇒ appears.
3. Click [INSTALL PRODUCTS].
4. Click [ISIS Driver] on the window below.
5. Error Recovery Guide Installation window
appears.
Error Recovery Guide is a software that dis-
plays troubleshooting information on screen if
any scanner error occurs. Although this soft-
ware’s installation is highly recommended, it
can be installed later if you do not install it in
this step.
6. Select a language used for installation on
[Choose Setup Language] window and click
[OK].
ATTENTION
For finishing the installation, it may be nec-
essary to restart your computer. Follow the
instructions on the window.
ATTENTION
Windows XP screenshots are used in this
section as examples. The windows and
operations may vary slightly depending on
your OS.
ATTENTION
When using Windows 2000 or Windows
XP, log on as a user with "Administrator"
privileges.
ATTENTION
This screen may not appear when the
"Autoplay" setting of your PC is OFF. In
this case, run "Install.exe" in this CD-ROM
directly from the "Explorer" or "My Com-
puter".
ATTENTION
When you select [Yes] for installing Error
Recovery Guide, the [Choose Setup Lan-
guage] window appears. Select a lan-
guage and follow the instructions on the
window. The Error Recovery Guide will
automatically continue finishing its installa-
tion. Please wait until the installation of
ISIS driver automatically starts.