Freedom9 G2400 - Manual (Page 6)

freeConnect Smart G2400 User’s Manual
3
Cost Reduction: VLANs can be used to create multiple broadcast domains, thus eliminating the need
of expensive routers.
Port-based (or port-group) VLAN is the common method of implementing a VLAN, and is the one
supplied in the Switch.
2.4 Features
• 24x10/100/1000Mbps Auto-negotiation Gigabit Ethernet ports
• All RJ45 ports support auto MDI/MDIX, so there is no need to use cross-over cables or an up-link
port
• Half duplex transfer mode for connection speed 10Mbps and 100Mbps
• Full duplex transfer mode for connection speed of 10Mbps, 100Mbps and 1000Mbsps
• Wire speed reception and transmission
• Store-and-Forward switching scheme capability to support rate adaptation and ensure data
integrity
• Up to 8k unicast addresses entities per device, self-learning, and table aging
• 4Mbits packet buffer
• Supports IEEE 802.3x flow control for full-duplex mode ports
• Supports Port-base VLAN
• Supports Port-base QoS
• Supports
Port Trunking
• Supports Port Mirroring
• Supports Port-setting for Speed/Disable, Flow control
• Easy configuration via Web Browser
• Easy setting via Web Management Utility
• Standard 19” Rack-mount size