Freedom9 G2400 - Manual (Page 20)

freeConnect Smart G2400 User’s Manual
17
Group 1: Ports 1, 2, 3, 4
Group 2: Ports 9, 10, 11, 12
Group 3: Ports 17, 18, 19, 20
For each group, you can select either to disable trunking, trunk only the first two ports in the group, or
trunk all four ports in the group.
Figure 21: Trunk Setting Page
If using VLANs, ensure that the ports being trunked together are in the same VLAN group.
6.9.4 Mirror Setting
Port Mirroring duplicates incoming and/or outgoing packets from one port to another port allowing a
network administrator to analyze the traffic on the network and make any necessary adjustments.
Configure port mirroring by assigning a source port from which to copy all packets and a sniffer port
where those packets will be sent (Figure 22).
Sniffer Mode: “Tx” (transmit) mode will duplicate the data transmitted from the source port and
forward it to the sniifer port. “Rx” (receive) mode will duplicate the data received from the source port
and forward it to the sniffer port. “Both” will duplicate all traffic to the sniffer port.
Figure 22: Mirror Setting Page
6.10 Maintenance Settings
There are six items in the Maintenance Menu: Status, System, Trap, Password, Backup Setting,