Freedom9 G2400 - Manual (Page 24)

freeConnect Smart G2400 User’s Manual
21
being logged out automatically for security reasons.
Figure 26: System Setting Page
6.10.4 Trap Setting
The Trap Setting page (Figure 27) allows the device to monitor for events on the Switch, and send an
Event Trap to a computer on the network, which can be viewed and received using the Web
Management Utility described earlier in the manual. To enable traps, enter the IP Address of the
computer that will receive the traps, and select which types of events you want to receive.
Figure 27: Trap Setting Page
Device Bootup: a trap is sent when the system boots up.
Illegal Login: a trap is sent when someone is trying to log into the Switch using an incorrect
password. The IP address that is attempting to log into the switch is also reported.