Furuno FM-4000 - Manual (Page 63)

Page 63 FM-4000
12.12 NAMING THE RADIO OR REMOTE MIC
You can change the name of the RADIO or Remote MIC. Example: “RADIO -
Cabin,” “RAM1 - Flybridge.”
1. Press and hold down the [CALL(MENU)] key until
the “Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup ” menu appears.
2. Press the [ENT] key, then use the CHANNEL selec-
tor knob to select “Unit Name Unit Name Unit Name Unit Name Unit Name .”
3. Press the [ENT] key.
4. With the Remote MIC connected, turn the CHAN-
NEL selector knob to select the Unit (“Radio Radio Radio Radio Radio ” or
“RAM1 RAM1 RAM1 RAM1 RAM1 ”) to name, then press the [ENT] key, other-
wise press the [ENT] key.
5. Press applicable key to enter the first letter of chan-
nel name.
Example: Press the [2(MEM)] key repeatedly to
toggle among the seven available characters asso-
ciated with that key: 2
2 2 2 2 Æ A A A A A Æ B B B B B Æ C C C C C Æ a aa aa Æ b bb bb Æ c cc cc Æ 2 2 2 2 2 ....
6. Press the [ENT] key to enter the first letter in the
name and move to the next letter to the right.
7. Repeat steps 5 and 6 to complete the name. The
name can consist of up to eight characters. If you
do not use all eight characters press the [ENT] key
to move to the next space. This method can also be used to enter a blank
space in the name. To clear the previous letter, press the [CLR] key.
8. Press and hold the [ENT] key to enter the name and return to the “Unit Unit Unit Unit Unit
Name Name Name Name Name ” menu.
9. If you want to enter the name of another unit, repeat steps 4 through 8.
10. To exit this menu and return to radio operation mode, press the [16/9] key.