Furuno FM-4000 - Manual (Page 42)

FM-4000 Page 42
The Individual call and Group call ringers can be disabled as follows:
1. Press and hold down the [CALL(MENU)] key
until “Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup ” menu appears.
2. Turn the CHANNEL selector knob to select the
“DSC Setup DSC Setup DSC Setup DSC Setup DSC Setup ” menu.
3. Press the [ENT] key, then use the CHANNEL
selector knob to select “DSC Beep DSC Beep DSC Beep DSC Beep DSC Beep .”
4. Press the [ENT] key.
5. Turn the CHANNEL selector knob to select “In-
In- In- In- In-
dividual dividual dividual dividual dividual ” if you wish to disable the Individual call
ringer, or “Group Group Group Group Group ” if you wish to disable the Group
call ringer and press the [ENT] key.
6. Turn the CHANNEL selector knob to select “Off Off Off Off Off .”
7. Press the [ENT] key to store the selected setting.
8. Press the [CLR] key twice to return to the “Radio
Radio Radio Radio Radio
Setup Setup Setup Setup Setup ” menu, then press the [CLR] key again to re-
turn to radio operation.
To enable the Individual or Group ringer tone, select “On On On On On ” in step “6” in this
procedure.
11.5.4 Transmitting an Individual Call
The Individual call feature allows you to contact another vessel that has a DSC
radio. This feature is similar to calling a vessel on CH16 and requesting to go
to another channel.
Using Pre-Programmed Vessel
1. Press the [CALL(MENU)] key to show the “DSC
DSC DSC DSC DSC
Call Menu Call Menu Call Menu Call Menu Call Menu ”.
2. Turn the CHANNEL selector knob to select “In- In- In- In- In-
dividual dividual dividual dividual dividual .” (To cancel, press the [CLR] key.)
3. Press the [ENT] key. The transceiver beeps
then the “Individual directory” appears.
4. Turn the CHANNEL selector knob to select the
“Individual” you want to contact.
5. Press the [ENT] key, then turn the CHANNEL
selector knob to select the operating channel
you want to communicate on, then press the
[ENT] key.
6. Press the [ENT] key again to transmit the individual
DSC signal.