Furuno FM-4000 - Manual (Page 62)

FM-4000 Page 62
12.11 CHANNEL NAMING
You may change the name of a channel.
Example: CH84 “CALL HOME”
1. Press and hold down the [CALL(MENU)] key until
the “Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup ” menu appears.
2. Press the [ENT] key, then use the CHANNEL selec-
tor knob to select “CH Name CH Name CH Name CH Name CH Name .
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select the chan-
nel to name, then press the [ENT] key.
5. Press applicable key to enter the first letter of the
channel name.
Example: Press the [4(GHI)] key repeatedly to toggle
among the seven available characters associated
with that key: 4
4 4 4 4 Æ G G G G G Æ H H H H H Æ IIIII Æ g gg gg Æ h hh hh Æ iiiii Æ 2 2 2 2 2 ....
6. Press the [ENT] key to enter the desired letter and
move the cursor one space to the right.
7. Repeat steps 5 and 6 to complete the name. The
name can consist of up to 16 characters. If you do
not use all 16 characters, press the [ENT] key to
move to the next space. This method can also be
used to enter a blank space in the name. To clear
the previous letter, press the [CLR] key.
8. Press and hold down the [ENT] key to enter the
name.
9. If you want to change the name of another channel,
repeat steps 3 through 8.
10. To exit this menu and return to radio operation mode, press the [16/9] key.