FujiFilm FinePix A600 - Manual (Page 86)

86
Installation on a Mac OS X
Pre-installation checklist
Z Hardware and software requirements
To run this software, you must have the hardware and software described below. Check your system before you begin the
installation.
* 1 Models with a USB port as a standard feature
* 2 Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet
connection.
MEMO
• Connect the camera directly to the Macintosh using the USB cable (mini-B). The software may not operate correctly if you use an
extension cable or connect the camera via a USB hub.
• Push the USB connector fully into the socket to ensure that it is securely connected. The software may not operate correctly if the
connection is faulty.
• Additional USB interface board is not guaranteed.
Compatible Mac
Power Macintosh G3 * 1 , PowerBook G3 * 1 ,
Power Macintosh G4, iMac, iBook,
Power Macintosh G4 Cube, PowerBook G4, or Power Macintosh G5
Operating System Mac OS X (compatible with version 10.2.8 to 10.4.3)
RAM
192 MB minimum
256 MB or better recommended
Hard disk space
Amount required for installation: 200 MB minimum
Amount required for operation: 400 MB minimum
Display 800 × 600 pixels or better, at least 32,000 colors
Internet connection * 2
• To use the FinePix Internet Service or mail attachment function:
An Internet connection or e-mail transmission software is needed
• Connection speed: 56 k bps or better recommended