FujiFilm FinePix A600 - Manual (Page 72)

72
U SET-UP
Use this function to specify whether frame numbers are
assigned consecutively from previous numbers or begin
again.
CHECK
MEMO
• Setting this function to CONT. makes file management
easier as it makes sure that file names are not
duplicated when images are downloaded to a PC.
• When the camera settings are RESET ( ➝p.71), the
frame number setting (CONT. or RENEW) is changed
to CONT. and the frame number itself does not return to
0001.
• In CONT. setting, images are stored beginning from the
highest file number on the current xD-Picture Card
when the xD-Picture Card already contains image files
with file numbers higher than the highest file number on
the last xD-Picture Card.
• File number runs from 0001 to 9999. Once 9999 is
exceeded, the directory number changes from 100 to
101. The maximum number is 999-9999.
• The displayed frame number may differ for images
photographed on other cameras.
FRAME NO.
* Formatted xD-Picture Card or internal memory used
for both A and B.
CONT. : Pictures are stored beginning from the highest
file number stored on the last xD-Picture Card
or internal memory used.
RENEW : Pictures are stored on each xD-Picture Card
beginning with a file number 0001.
A A
B B
CONT. RENEW
100-0009
10:00 AM 5/24/2006
File number
Frame number
Directory number
The last 4 digits of the 7-digit number in the top right
corner of the LCD monitor are the file numbers, while
the first 3 digits show the directory number.
How to use the SET-UP menu (
➝p.69)