Fostex LM16 User Manual

Page 22

Model LM16 [Names and functions]

Control unit (Master channel)

(18) Monitor section

(a) [MONITOR L/R] jacks

You can connect a monitor amplifier or powered
monitor speakers to these jacks. The output level
can be adjusted by the [MONITOR] control.

(b) [PHONES] jack

Connects headphones. You can adjust the output
level using the [PHONES] and [MONITOR] controls.

(c) [PHONES] control

Adjusts the output level of the [PHONE] jack.

(d) [MONITOR LEVEL] indicators

Indicate the output level of the monitor signal se-
lected by the [MONITOR SELECT] switch (or the solo
monitor signal).

(e) [SOLO] indicator

When at least one of the [SOLO] switches is set to
ON, the [SOLO] indicator slowly flashes, while the
solo monitor signal is output from the [MONITOR
(L/R)] and [PHONES] jacks.

(f) [MONITOR SELECT] switch

Selects signals to be monitored. You can select from
Groups 1-2, Groups 3-4, Stereo and Effect return by
pressing the switch as many time as required.
When solo monitor is active, the selection is not ef-
fective (see page 32 for details).

(17) [SUB IN] jacks / [SUB IN] control

You can connect the [SUB IN] jacks to a CD player,
MD player, external mixer, etc., and use the [SUB
IN] control to adjust the input level.
By setting the [SOURCE] switches on input
channels 15 and 16 to the "SUB IN" position (

the signals from the [SUB IN] jacks are sent to these
channels (L for channel 15, R for channel 16). See
page 34 for details.

Note that the [TRIM] control on each of channels 15
and 16 does not affect the [SUB IN] signal.