FIC M296 - Manual (Page 32)

Outline of the M295 / M296
„
Set Supervisor Password – Specifies if the system prompts you to enter a
password when entering Setup.
„
Set User Password – Specifies if the system prompts you to enter a password
when accessing the system. The Set User Password function will be enabled once a
Supervisor password is set. Enter a new password with up to eight alphanumeric
characters, and then enter this same new password again for confirmation.
„ Diskette access – Controls access to diskette drive.
„ Fixed disk boot sector – [Write Protect] enables write protect boot sector
on hard disk to prevent against viruses. [Normal] disables this write protect
function.
„ Password on boot – Enables password check when booting.
1-28 FIC M295 / M296 Service Manual