FujiFilm 2800 Zoom - Manual (Page 18)

3
35 34
The Advanced Features Photography section introduces a range of camera functions that you can
access by setting the Mode switch to “
q ” or “ e ”.
ADVANCED FEATURES PHOTOGRAPHY
3 Advanced Features
Photography ERASING SINGLE FRAME
4
Press “d” or “c” to display the image to be
erased.
Press the “MENU/OK” button to erase the
displayed image. When erasing is complete, the
next image appears and the “
¨ ”
message is displayed.
● ! Press the “BACK” button to cancel frame erasing.
● ! “ ¢ ” is displayed for frames with DPOF
settings and they cannot be erased ( ➡P.85).
● ! If the “
™
” message appears, you
cannot erase the frame. Use the camera on which
the frame was protected to unprotect the frame.
3
To continue erasing images, repeat the
procedure from step
. 3
qStill image
1 Auto ( ➡P.36)
This is the easiest mode
for taking pictures and can
be used in a wide range of
conditions.
AUTO
OFF
OFF
OFF
e Movie (Video) —
e Movie ( ➡P.49)
In this mode, you can shoot
up to 60 seconds of video
at a time.
Mode swich
Factory
default
Shared menu
settings
dOPTION
✽ See P.62 for
more infor-
mation on
each of the
settings.
y Flash ( ➡P.38)
5 Macro ( ➡P.41)
l Self-timer ( ➡P.42)
7 Voice captioning ( ➡P.44)
2 Manual ( ➡P.36)
This mode allows you to
specify the “EV” and “WHITE
BALANCE” settings.
AUTO
OFF
0
AUTO
y Flash ( ➡P.38)
5 Macro ( ➡P.41)
a EV ( ➡P.46)
s White Balance
(Selecting the light source)( ➡P.47)
—
OFF
OFF
6 Continuos shooting
(
➡P.48)
This mode allows you to
take up to 4 shots in rapid
succession.
5 Macro ( ➡P.41)
l Self-timer ( ➡P.42)
Photography mode
■ Photography Mode Specifications
Accessible menu settings