Using the optional ac power adapter, Setting the date and time – FujiFilm 2800 Zoom User Manual
Page 10
18
1
19
DC IN 5V Socket
●
!
See P.80 for notes on using the AC power adapter.
●
!
Only connect or disconnect the AC power adapter
when the camera is switched off.
Connecting or disconnecting the AC power adapter
while the camera is switched on temporarily
interrupts the power supply to the camera, so that
images or movies being shot at the time are not
recorded. Failing to switch the camera off first can
also result in damage to the SmartMedia or
malfunctions during PC connection.
●
!
Install the equipment near a socket outlet for easy
accessibility.
●
!
The shapes of the AC power adapter, the plug and
socket-outlet depend on the country.
USING THE OPTIONAL AC POWER ADAPTER
AC power adapter (optional)
Always use a FUJIFILM AC Power Adapter AC-5V.
Use the AC power adapter in situations when a loss
of power will cause problems, such as during file
downloading (via the USB connection). Using the
AC power adapter also allows you to take pictures
and play back images without worrying about
depleting the batteries.
h Compatible AC power adapters
Model: AC-5VH/AC-5VHS
Check that the camera is switched off. Plug the
AC power adapter connector into the “DC IN 5V”
socket and then plug the AC power adapter into
the power outlet.
Connecting the AC power adapter does not
allow you to charge the Ni-MH batteries. Use the
optional battery charger (
➡P.75) to charge the
Ni-MH batteries.
1Use “d” or “c” to select the desired item and then
use
“a (
[
)”
and
“b (
]
)”
to correct the setting.
2When you have finished setting the date and time,
press the “MENU/OK” button to confirm the setting.
The “SET–UP” menu reappears. Press the
“MENU/OK” button to complete the settings.
●
!
If you hold down “a ([)” or “b (])”, the numbers
change continuously.
●
!
When the time displayed passes “12:00:00”, the
AM/PM setting automatically switches.
●
!
You cannot set the seconds. To set the time
precisely, press the “MENU/OK” button when the
time signal reaches zero.
SETTING THE DATE AND TIME
0
1
0
2
3
4
4
AC-5VH
If the date was cleared and you selected “H”,
the camera switches to photography or playback
mode without returning to the “SET–UP” menu.