Furuno FCV-1150 - Manual (Page 16)

7
NMEA port
Connect a GPS navigator, etc. to NMEA port J2 #1 to #4. You can connect two sensors (for ex-
ample, GPS receiver GP-310B and smart sensor). One connects to NMEA port J2 #1 to #2 and
the other connects to the NMEA port J2 #3 to #4. A satellite compass can be connected to NMEA
port J2 #5 to #6.
Cable connected to NMEA port: Furuno cable MJ series
Approx. 30
Shield
Cut shield here and
solder vinyl wire.
6
Clamp vinyl sheath with cable clamp.
Approx. 80
3
Armor
Vinyl tape
6
Sheath
30
Cable connected to NMEA port: Furuno cable CO-SPEVV-SB-C
3
6 30
Cut shield here and
solder vinyl wire.
Clamp vinyl sheath with cable clamp.
Vinyl tape
Vinyl tape
Sheath
Armor Cut shield here and
solder vinyl wire.
Clamp armor with cable clamp.
Cable connected to NMEA port: JIS cable TTYCS-1Q
Conductor
S = 0.75 mm
Ǟ = 1.11 mm
(AWG18)
2
TTYCS-1Q (Four core twisted)
Armor
Shield
Sheath
Ǟ = 11.3 mm
Approx. 80