Follett VU300 - Manual (Page 4)

Specifications
Electrical
Each dispenser requires a separate circuit with electrical disconnect within 10 ft (6m). Equipment ground required.
Standard electrical – 115V, 60Hz, 1 phase. Maximum dispenser fuse – 20 amps, maximum icemaker fuse – 20
amps each. Cord and plug provided with each dispenser.
Model Icemaker Dispenser
number amperage amperage
Single-sided models
VU300M series 11.0 amps ea (2) 6.0 amps
VU300B series 11.0 amps ea (2) 7.0 amps
Dual-sided models
VU30020MD series 11.0 amps ea (2) 8.0 amps
Plumbing
Dispenser 3/4" PVC pipe nipple for bin drain
3/4" PVC pipe nipple for drain pan drain
1" ID hose for beverage bath drain
Beverage connections
1/4" ID syrup beverage hose
3/8" ID carbonated water beverage hose
3/8" ID plain water beverage hose
Note: Drains should be hard piped and insulated. Maintain at least 1/4" per foot (6mm per 304mm run)
slope on drain line run.
Water disconnect within 10 feet (3m) of dispenser is suggested for automatic load units.
Follett recommends use of a Follett water filter (part# 00130229) on icemakers connected
to automatic fill dispensers.
Icemaker Refer to detailed specifications in icemaker installation manual
packed with icemaker
5