FujiFilm Zoom Date 160ez - Manual (Page 30)

28
1
SELECTING THE FLASH MODE
1
Turn the camera on and press the
MENU/SET button.
☞
The LCD lights orange, the FLASH menu
blinks/lights and the flash mode selection
mode is entered.
2
Press the cv buttons and select
the flash mode.
☞
The selected mode blinks.
3
Press the MENU/SET button to
complete the setting.
☞
The LCD changes to green and the mode
set is shown.
/Unless the d mode is set, the a
mode is set when the power is turned
off. The
d mode is kept even when
the power is turned off.
/The w mode is cancelled after each
shot.
When you want to use this mode con-
tinuously, hold the MENU/SET button
down for 2 seconds or longer after
choosing the mode (The chosen mode
will continue to blink even after it is
set). The mode is kept so that a num-
ber of pictures can be taken. The mode
is canceled when the power is turned
off.
The continuous shooting mode setting
in the
w mode is cancelled when the
continuous shooting mode is selected
in the
h or q mode (➜p.38, 39).
0 1
0 2
0 3
LCD
Flash
mode
Intelligent Multi-
programmed
Flash Mode
Red-eye
Reduction
Flash Mode
Fill-in Flash
Mode
Flash-off
Mode
Night Portrait
(Slow Sync)
Mode
a d f g w
●Flash Modes