FUJITSU Fi-6240 - Manual (Page 19)

fi-6140/
fi-6240 Image Scanner Getting Started AP-3
Appendix3 REPLACING CONSUMABLES
■ Consumables and Replacement
Cycles
The followings are the specifications of consumables and
their recommended replacement cycles.
To purchase consumables, contact the store where you pur-
chased the scanner or an authorized FUJITSU scanner service
provider.
The replacement cycles above are rough guidelines when
using A4/Letter woodfree or wood containing paper 64 g/m
2
(17 lb). This cycle varies according to the type of the paper
used and how frequently the scanner is used and cleaned.
The following illustrations show the locations of the consum-
ables. For details, refer to chapter 4 "Replacing Consumables"
of "fi-6140/fi-6240 Operator’s Guide" on the Setup CD-
ROM.
■ Replacing the Brake Roller
■ Replacing the Pick Roller
WARNING
During its operation, the inside glass of the ADF
becomes very hot.
Before replacing the consumables, turn its power off
and unplug the AC adapter from the outlet. Wait at
least 15 minutes.
Description Parts No.
Standard
Replacement Cycle
Brake roller PA03540-0001 After 200,000 sheets or
one year
Pick roller PA03540-0002 After 200,000 sheets or
one year
ATTENTION
Use only the designated consumables.
2
3
1
1
2
3