Frymaster H14 Series - Manual (Page 21)

3–11
5. To change the times, use the following switches:
Left Minutes (in increments of ten)
Left
1
Minutes (in increments of one)
Left
2
Seconds (in increments of ten)
Right
1
Seconds (in increments of one)
6. Press the switch to lock in the new settings, and either ON/OFF switch to exit the
programming mode. Both displays will show OFF.
How to Change the Cooking Temperature Setpoint
1. Enter the program mode. See How to Enter the Program Mode on page 3-10.
2. Press and release the switch until the menu item to be changed is displayed.
3. Press the switch to show the cooking temperature setpoint, displayed as SET-TEMP in the
left display. The current setpoint temperature is in the right display (for example- 350F). The
temperature will be in Fahrenheit ( F) or Celsius (C). Pressing the right 2 switch toggles the
computer between Fahrenheit ( F) and Celsius (C).
4. To change the temperature, use the following switches:
Left 1 Hundreds
Left
2
Tens
Right 1 Ones
NOTE: The computer cannot be programmed for a temperature greater than 375
°F (191°C).
5. Exit the program mode by pressing either ON/OFF switch .
How to Enter a Product Name in a Test Menu
1. Enter the program mode. See How to Enter the Program Mode on page 3-10.
2. Press the switch to select Test Menu 1 or 2.
3. Press the switch to enter the edit mode. The right display will show EDIT and a blinking
cursor will appear in the left display.
4. To enter a letter, use the left 1 switch to go UP in the alphabet. Use the left 2 switch to go
DOWN in the alphabet.
NOTE: Characters available are the letters A-Z and the numbers 0-9. Special characters *, *, -,
?, and / are also available, as is a blank space.
NOTE: Pressing the left switch will reset the product name to the factory defaults.
5. To move to a different character position, use the
or switches.