How to operate your vehicle, Reverse lock-out reverse spin, Forward – Fisher-Price WILD THING 74180 User Manual
Page 18
18
IMPORTANT
A 25
AMP FUSE MUST
BE INSTALLED IN
TO
P
OF BATTER
Y BEFORE
TO
Y WILL
RECHARGE
OR OPERATE
®
TM
IMPORTANT
A 25
AMP FUSE MUST
BE INSTALLED IN
TO
P
OF BATTER
Y BEFORE
TOY W
ILL RECHARGE
OR OPERATE
®
How to Operate Your Vehicle
K
• Once your child has mastered driving forward and
knows how to start and stop easily, it’s time to fasten
the reverse connectors.
• Carefully position the vehicle upside down.
• Plug the reverse connectors together.
• Position the vehicle upright. The vehicle can now be
driven forward, backward and can spin.
• To lock-out reverse and spin at any time, simply
unplug the connectors.
• To spin, push one shifter handle away from you while
pulling the other towards you. Hang on tight!
• To change direction, switch the position of the shifter
handles.
• To drive in reverse, pull the shifter handles toward you
and press the foot pedal. The vehicle will travel in
reverse at a maximum of 4 mph.
• Stopping in reverse is the same as stopping while
driving forward. Simply lift your foot off the foot pedal to
stop the vehicle.
IMPORTANT
A 25
AMP FUSE MUST
BE INSTALLED IN
TO
P
OF BATTER
Y BEFORE
TOY W
ILL RECHARGE
OR OPERATE
®
Reverse Lock-Out
Reverse
Spin
• To drive forward, push the shifter handles forward and
press down on the foot pedal. The vehicle will move
forward at a maximum of 4 mph.
• Your vehicle has a patented, electronic braking system
that automatically stops the vehicle when your child's
foot is lifted from the foot pedal.
Forward
Right
Shifter
Left
Shifter
Foot
Pedal
Reverse
Connectors
Right
Shifter
Left
Shifter
Foot
Pedal
Right
Shifter
Left
Shifter
Foot
Pedal
Your vehicle has been designed with a REVERSE LOCK-OUT system and has been pre-set to drive forward only. The
vehicle will not drive in reverse or spin until you fasten the reverse connectors on the underside of the vehicle body. We
recommend that your child master use of the shifter handles and the foot pedal to start and stop the vehicle before
fastening the reverse connectors.
Bottom View