Farallon Communications 612 - Manual (Page 62)

4-24 Netopia ISDN Modem User’s Guide
5. Press F10 to connect to the Netopia ISDN Modem via the
chosen COM por t. The configuration screen appears.
Step 6:
Selecting the switch type
6. Move the cursor to the ISDN switch type used by your telephone
company and press the space bar to select it. You should have
received the ISDN switch type from your telephone company.
Steps 7 to 9:
Configuring Phone #1
7. Move the cursor to the Phone #1 field and enter the first
telephone (or “director y”) number of the ISDN line to which your
Netopia ISDN Modem is connected.
8. Move the cursor to the SPID #1 field and enter the
corresponding Ser vice Profile Identifier (SPID) for the telephone
number you entered in the previous step. You should have also
received this SPID from your telephone company.
The Route Voice Calls option lets you route calls to analog
telephone devices connected to the analog device por ts. By
default, calls to both ISDN telephone numbers ring the devices
connected to both por ts simultaneously. If you have more than
one telephone number, you can route calls from the two
numbers to Phone Por t 1 or Phone Por t 2.