Fujitsu Siemens Computers E-6555 - Manual (Page 25)

25
Exiting from the Security Menu
When you have finished setting the parameters on the
Security Menu, you can either exit from setup utility or
move to another menu. If you wish to exit from setup
utility, press the Esc key to go to the Exit Menu. If you
wish to move to another menu, use the cursor keys.
Minimum User
Password Length: –— [0]
Password on Boot: ■ Disabled
■ First Boot
■ Every Boot
[Disabled] When set to First Boot, a password (User or Supervisor) is required
just once after the Power On Self Test (POST) before the operating
system will be read from a disk. When set to Every Boot, a pass-
word (User or Supervisor) is required every time after the Power On
Self Test (POST) before the operating system will be read from a
disk. When set to Disabled no password is required.
Password on
Unattended Boot ■ Disabled
■ Enabled
[Disabled] When Enabled, a PS/2 keyboard and mouse are locked out when
an unattended boot occurs via LAN until a password is entered.
Password on
Resume: ■ Disabled
■ Enabled
[Disabled] When set to Enabled, a password (User or Supervisor) is required
before the operating system will resume. When set to Disabled no
password is required. If no Supervisor Password is set this feature is
not available and no password is required.
Boot from Remov-
able Media: ■ All
■ Supervisor only
[All] Enable password allows supervisor access only.
Floppy Disk
Access: ■ All
■ Supervisor only
[All] Enable password allows supervisor access only.
Hard Disk Security: –— –— Configures hard disk security features
Owner
Information: –— –— Sets Owner information.
Hard Disk Boot
Sector: ■ Normal
■ Write Protected
[Normal] Sets protection mode for hard disk drive.
Security Panel on
Resume ■ Disabled
■ Enabled
Enabled Enables or disables the Security Panel feature upon Resume from
Suspend.
Table 14: Fields, Options and Defaults for the Security Menu
Menu Field Options Default Description