FujiFilm FINEPIX JZ200 series - Manual (Page 94)

80 Troubleshooting
Problems and Solutions
Connections/Miscellaneous
Problem Problem Solution Solution
No picture or sound. No picture or sound.
• • The camera is not properly connected The camera is not properly connected: Connect the camera properly ( : Connect the camera properly ( P P 40). 40).
• • An A/V cable was connected during movie playback An A/V cable was connected during movie playback: Connect the camera once movie playback has ended. : Connect the camera once movie playback has ended.
• • Input on the television is set to “TV” Input on the television is set to “TV”: Set input to “VIDEO”. : Set input to “VIDEO”.
• • The camera is not set to the correct video standard The camera is not set to the correct video standard: Match the camera : Match the camera Q Q VIDEO SYS- VIDEO SYS-
TEM TEM setting to the TV ( setting to the TV ( P P 71). 71).
• • The volume on the TV is too low The volume on the TV is too low: Adjust the volume. : Adjust the volume.
No color No color Match the camera Match the camera Q Q VIDEO SYSTEM VIDEO SYSTEM setting to the TV ( setting to the TV ( P P 71). 71).
The computer does not The computer does not
recognize the camera.
recognize the camera.
Be sure the camera and computer are correctly connected ( Be sure the camera and computer are correctly connected ( P P 49). 49).
Pictures can not be Pictures can not be
printed.
printed.
• • The camera is not properly connected The camera is not properly connected: Connect the camera correctly ( : Connect the camera correctly ( P P 41). 41).
• • The printer is off The printer is off: Turn the printer on. : Turn the printer on.
Only one copy is printed/ Only one copy is printed/
the date is not printed.
the date is not printed.
The printer is not PictBridge compatible. The printer is not PictBridge compatible.
The camera is unre- The camera is unre-
sponsive.
sponsive.
• • Temporary camera malfunction Temporary camera malfunction: Remove and reinsert the battery ( : Remove and reinsert the battery ( P P 8). 8).
• • The battery is exhausted The battery is exhausted: Charge the battery ( : Charge the battery ( P P 66) or insert a fully-charged spare battery ( ) or insert a fully-charged spare battery ( P P 8). 8).
The camera does not The camera does not
function as expected.
function as expected.
Remove and reinsert the battery ( Remove and reinsert the battery ( P P 8). If the problem persists, contact your FUJIFILM dealer. 8). If the problem persists, contact your FUJIFILM dealer.
No sound. No sound. Turn silent mode off ( Turn silent mode off ( P P 65). 65).
Date and time added by Date and time added by
S
S DATE STAMP DATE STAMP
are not correct. are not correct.
The camera clock is not correctly set The camera clock is not correctly set: Reset the date and time ( : Reset the date and time ( P P 15). 15).
Date and time are added Date and time are added
to the pictures.
to the pictures.
T T + + U U or or T T is selected for is selected for S S DATE STAMP DATE STAMP option option: Added shooting date and time : Added shooting date and time
can not be deleted from the pictures. To take pictures without date and time, select can not be deleted from the pictures. To take pictures without date and time, select OFF OFF for for
S S DATE STAMP DATE STAMP ( ( P P 71). 71).
FinePixViwer can not be FinePixViwer can not be
installed or run.
installed or run.
FinePixViwer does not support Mac OS X 10.7 or later. Use the application supplied with Mac OS X FinePixViwer does not support Mac OS X 10.7 or later. Use the application supplied with Mac OS X
or third-party software (
or third-party software ( P P 47). 47).