FujiFilm FINEPIX JZ200 series - Manual (Page 63)

49 Connections
Viewing Pictures on a Computer
Connecting the Camera Connecting the Camera
1 If the pictures you wish to copy are stored on a memory card, insert the
card into the camera.
R Windows users may require the Windows CD when starting the software for
the first time.
Q Loss of power during transfer could result in loss of data or damage to the mem-
ory card. Charge the battery before connecting the camera.
2 Turn the camera off and connect the
supplied USB cable as shown, mak-
ing sure the connectors are fully in-
serted. Connect the camera directly
to the computer; do not use a USB
hub or keyboard.
3 Press the a button for about a second to turn the camera on. After start-
ing MyFinePix Studio or FinePixViewer, follow the on-screen instructions
to copy pictures to the computer. To exit without copying pictures, click
Cancel.