FujiFilm FINEPIX JZ200 series User Manual

Page 92

Troubleshooting

Problems and Solutions

Problem

Solution

No face is detected.

• • The subject’s face is obscured by sunglasses, a hat, long hair, or other objects

The subject’s face is obscured by sunglasses, a hat, long hair, or other objects: Remove

: Remove

the obstructions.

• • The subject’s face occupies only a small area of the frame

The subject’s face occupies only a small area of the frame: Change the composition so that

: Change the composition so that

the subject’s face occupies a larger area of the frame (

P 22).

22).

• • The subject’s head is tilted or horizontal

The subject’s head is tilted or horizontal: Ask the subject to hold their head straight.

: Ask the subject to hold their head straight.

• • The camera is tilted

The camera is tilted: Keep the camera level (

: Keep the camera level (

P 17).

17).

• • The subject’s face is poorly lit

The subject’s face is poorly lit: Shoot in bright light.

: Shoot in bright light.

Wrong subject is

Wrong subject is
selected.

selected.

The selected subject is closer to the center of the frame than the main subject. Recompose the

The selected subject is closer to the center of the frame than the main subject. Recompose the
picture or turn face detection off and frame the picture using focus lock (

picture or turn face detection off and frame the picture using focus lock (

P 22).

22).

The flash does not fire.

• • The flash is not available in the current shooting mode

The flash is not available in the current shooting mode: Choose a different shooting mode

: Choose a different shooting mode

((

P 20).

20).

• • The battery is exhausted

The battery is exhausted: Charge the battery (

: Charge the battery (

P 6) or insert a fully-charged spare battery

6) or insert a fully-charged spare battery

((

P 8).

8).

• • The camera is in continuous mode

The camera is in continuous mode: Select

: Select OFF

OFF for

for

CONTINUOUS

CONTINUOUS ( (

P 55).

55).

• • The camera is in silent mode

The camera is in silent mode: Turn silent mode off (

: Turn silent mode off (

P 65).

65).

• • The flash is off (

The flash is off (

)): Choose a different flash mode (

: Choose a different flash mode (

P 26).

26).

Some flash modes are

Some flash modes are
not available.

not available.

• • The desired flash mode is not available in the current shooting mode

The desired flash mode is not available in the current shooting mode: Choose a different

: Choose a different

shooting mode (

P 20).

20).

• • The camera is in silent mode

The camera is in silent mode: Turn silent mode off (

: Turn silent mode off (

P 65).

65).

The flash does not fully

The flash does not fully
light the subject.

light the subject.

• • The subject is not in range of the flash

The subject is not in range of the flash: Position the subject in range of the flash (

: Position the subject in range of the flash (

P 92).

92).

• • The flash window is obstructed

The flash window is obstructed: Hold the camera correctly (

: Hold the camera correctly (

P 17).

17).

Pictures are blurred.

• • The lens is dirty

The lens is dirty: Clean the lens (

: Clean the lens (

P 75).

75).

• • The lens is blocked

The lens is blocked: Keep objects away from the lens (

: Keep objects away from the lens (

P 17).

17).

• •

s is displayed during shooting and the focus frame is displayed in red

is displayed during shooting and the focus frame is displayed in red: Check focus

: Check focus

before shooting (

P 81).

81).

• •

k is displayed during shooting

is displayed during shooting: Use the flash or a tripod (

: Use the flash or a tripod (

P 27).

27).

This manual is related to the following products:

FINEPIX JZ100 series