FUJITSU PDS4207W-H - Manual (Page 7)

7
ENGLISH
Connectors
AUDIO INPUT Pin jack
VIDEO INPUT BNC
S-VIDEO INPUT S terminal
COMPONENT VIDEO INPUT BNC
RGB 1 INPUT 15-pin mD-sub
RGB 2 INPUT BNC
RS-232C 9-pin D-sub
Checking Accessories
Cable clamper
×
2 Power cord Remote controller
×
1 AA battery
×
2
User’s Manual
×
1 Bracket
×
2 (2 types) Screw
×
2 (2 types)
Cable clampers
• The accessory cable clampers are for fastening the connected
signal cables and a power cable. When installing this display
on a wall or ceiling, insert the cable clampers into the holes on
the rear of the display.
∗
When connecting separately pur-
chased BNC terminals, conversion
connectors are required between the
pin jacks and the BNC terminals, so
purchase these also.
∗
Cables connecting the personal com-
puter vary according to the type of
machine, so consult your product
dealer.
ACCESSORIES
Connecting to External Equipment
Cables for connecting external equipment must be
purchased separately.
A B
USER’S
MANUAL
Cable clamper
(Attach as in the illustration.)
Bundle connecting cables so
that they lead downwards, as
in the illustration.
Screw A (10 mm)
Screw B (20 mm)
RS-232C
RGB 1 INPUT
RGB 2 INPUT
VIDEO INPUT
COMPONENT
VIDEO INPUT
(color difference
input)
AUDIO INPUT
RGB 1
SYNC SW
TTL/ANALOG (75
Ω
)
RGB 2
SYNC SW
TTL/ANALOG (75
Ω
)
S-VIDEO
INPUT
To component
video output
terminal
Connecting to AV equipment
Connecting to PC
To RS-232C
terminal
Display
(to analog
RGB
output
terminal) Display
(to analog RGB
output terminal)
To S-video
output
terminal To video
output
terminal To audio
output
terminal
PDS4207W-H
×
3
PDS4207E-H
Ч
1