FUJITSU PDS4207W-H - Manual (Page 43)

43
ENGLISH
Pin No. No. Signal
1 DCD (Data Carrier Detect)
2 RD (Receive Data)
3 TD (Transmit Data)
4 DTR (Data Terminal Ready)
5 GND (Ground)
6 DSR (Data Set Ready)
7 RTS (Request To Send)
8 CTS (Clear To Send)
9 RI (Ring Indication)
RGB 1 input terminal (Display is RGB 1 INPUT.)
Connects to a personal computer RGB output terminal.
Pin No. Input signal Pin No. Input signal
1 Red 9
2 Green 10 Ground
3 Blue 11
4 12
5 Ground 13 Hor. sync
6 Ground 14 Vert. sync
7 Ground 15
8 Ground Outer side Ground
RS-232C input terminal (Display is RS-232C.)
Connects to a personal computer RS-232C terminal.
1 5
6 9
Pin No.
5 4 3 2 1
10 9 8 7 6
15 14 13 12 11
∗
The sync switch (TTL/ANALOG
switch) is on the rear of the 13-pin hori-
zontal sync and 14-pin vertical sync
terminals.
Points about shipping
The Plasmavision is a precision instrument, and requires dedicated packing materials for shipping.
∗
Use Fujitsu's packing materials only.
Regulation····PDS4207W-H/PDS4207E-H
• UL, CSA ······ Safety: UL1950/CSA C22.2 No.950/FCC Class
EMC: FCC Part 15 Class A
• CE ··············· Safety: EN60950 1992/A1: 1993/A2: 1993/A3: 1995
EMC: EN55022 1994, Class A
EN61000-3-2 1995
EN61000-3-3 1995
EN50082-2 1995
EN61000-4-2 1995
EN61000-4-4 1995
EN61000-4-8 1993
ENV50140 1993
ENV50141 1993
ENV50204 1995
• AS ··············· Safety: IEC950 A1/A2/A3/A4
EMC: AS/NZS 3548