FUJITSU PG-FCS102 - Manual (Page 17)

2 Installing a 1Gbit/s Ethernet I/O Module
117
E
4 Remove the top cover.
→
"7.2 Removing and Attaching the Top Cover" in "Server Blade User's Guide"
5 Install the 1Gbit/s Ethernet I/O Module.
Make sure the 1Gbit/s Ethernet I/O Module is securely on the slot.
6 Secure the 1Gbit/s Ethernet I/O Module with the screws.
Secure the 1Gbit/s Ethernet I/O Module with the three screws included with this product.
7 Attach the top cover.
→
"7.2 Removing and Attaching the Top Cover" in "Server Blade User's Guide"
8 Install the server blade to the chassis.
→"4.2 Installing Server Blades" in "Blade Server System Unit Hardware Guide"
Expansion board slot
[Rear]
1Gbit/s Ethernet
I/O Module
Screws