5 settings, Setup mode, See p.63 for more information on the set-up menu – FujiFilm 1400 Zoom User Manual
Page 32: R dpof set all/cancel all
63
5
Settings
Display
Explanation
QUALITY
BACK
FILE SIZE
FRAME NO.
BEEP
DATE / TIME
FINE/NORMAL/BASIC
EXE
1280
✕
960/640
✕
480
RENEW/CONT
HIGH/LOW/OFF
EXE
Sets the compression ratio for recording. Can be set as
described on P.65.
(
: FINE
)
: NORMAL
*
: BASIC
Exits set-up.
Sets the number of pixels recorded (image file size).
Can be set as described on P.65.
Specifies whether the Frame NO. Memory function is
used (
Selects the buzzer volume for camera operation. When
this is set to OFF, the camera buzzer emits no sound.
NORMAL
–––
Factory default
1280
✕
960
RENEW
HIGH
–––
✽
See the following page for information on using the settings.
62
2
A confirmation screen appears. To continue,
press the “MENU/EXE” button.
●
!
“SET ALL” specifies 1 print for all the images.
●
!
The “SET FRAME” specifications and cropping
settings are cancelled.
●
!
Prints can be specified for up to 999 frames on the
same SmartMedia. If you specify more than 999
frames, the “
8
” warning appears.
3
The total number of prints is displayed on the
LCD monitor and then the menu screen
reappears.
●
!
“TOTAL” shows the total number of prints specified.
●
!
If you cancel all the frames, the “TOTAL” display
reverts to “00000”.
SETUP MODE
e
The table below explains the camera setting.
5
Settings
R DPOF SET ALL/CANCEL ALL
PLAYBACK MENU