FieldServer FS-8704-12 - Manual (Page 7)

FS-8704-12 GE-EGD Driver Manual Page 7 of 23
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: [email protected]
5.2 Client S ide Node P arameters
Section Title
Nodes
Column Title
Function Legal Values
Node_Name Provide name for Node
Up to 32 alphanumeric
characters
IP_Address The IP address in dot format of the EGD-Device.
Nnn.nnn.nnn.nnn
Where nnn is in the range 0-255.
Protocol Specify protocol used ge_egd
Adapter
Specify which adapter connects to the network the EGD-
device is connected to.
N1, N2
2
Example
// Consumer (Passive Client) Side Nodes
Nodes
Node_Name , IP_Address , Adapter , Protocol
Node_A , 192.168.1.102 , N1 , ge_egd
5.3 Client Side Map Descriptor P arameters
5.3.1 FieldServer Specific Map Descriptor Parameters
Column Title Function Legal Values
Map_Descriptor_Name Name of this Map Descriptor Up to 32 alphanumeric characters..
Data_Array_Name
Name of Data Array where data is to be
stored in the FieldServer One of the Data Array names from
Section 4
Data_Array_Location Starting location in Data Array
0 to (Data_Array_Length-1) as specified
in Section 4
Function Function of Client Map Descriptor Passive
2
Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction manual for details of the ports available
on specific hardware.