FieldServer FS-8704-12 - Manual (Page 11)

FS-8704-12 GE-EGD Driver Manual Page 11 of 23
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: [email protected]
6 CONFIGURING THE FIEL DSERVER AS A GE-EGD SERVER
6.1 Server Side Connection Parameters
Section Title
Connections
Column Title Function
Legal Values
Adapter Adapter Name N1,N2
Protocol Specify protocol used ge_egd
Example
Adapters
Adapter
, Protocol
N1 , ge_egd
6.2 Server Side Node Parameters
Section Title
Nodes
Column Title
Function Legal Values
Node_Name Provide name for Node
Up to 32 alphanumeric
characters
IP_Address The IP address in dot format of the EGD-Device.
Nnn.nnn.nnn.nnn
Where nnn is in the range 0-255.
Protocol Specify protocol used ge_egd
Adapter
Specify which adapter connects to the network the EGD-
device is connected to.
N1, N2
3
Example
// Producer(Active Server) Side Nodes
Nodes
Node_Name , IP_Address, , Adapter , Protocol
node_A , 192.168.1.102, , N1 , ge_egd
3
Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction manual for details of the ports available
on specific hardware.