FieldServer FS-8704-12 - Manual (Page 17)

FS-8704-12 GE-EGD Driver Manual Page 17 of 23
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: [email protected]
Adapters
Adapter , Protocol
N1 , ge_egd
Nodes
Node_Name , IP_Address , Adapter , Protocol
PLC90-30 , 216.232.242.3 , N1 , ge_egd
Nodes
Node_name , Protocol
null_node
, ge_egd
Data_Arrays
Data_Array_Name , Data_Format , Data_Array_Length
DA_AO_01
, Float , 200
DA_AI_00 , BYTE , 100
DA_AI_01 , BIT , 100
DA_AI_02 , UINT16 , 100
DA_AI_03 , UINT32 , 100
DA_AI_04 , SINT16 , 100
DA_AI_05 , SINT32 , 100
DA_AI_06 , FLOAT , 100
DA_AI_07 , FLOAT , 100
EGD_DIAG , UINT32 , 100
EGD_STATS , UINT32 , 100
Map_Descriptors
Map_Descriptor_Name, Data_Array_Name, Node_Name
egd-ii ,
EGD_DIAG , Null_Node
egd-stats , EGD_STATS , Null_Node
This is the IP address of the producing port. You can obtain this by
using the Versapro HWC program and double clicking on the Module
with the adapter shown in the EGD configuration. (Fred, in this
example) Now look for the Ethernet port address.