Adjusting color balance ([ white balance]) – FujiFilm F480/F485 User Manual
Page 60

60
[SHOOTING MENU]
Adjusting color balance
([
WHITE BALANCE])
Available Photography mode: s (
➝p.47)
Adjust the color balance based on white to suit the color
of the ambient light around the subject.
AUTO: Automatic adjustment
6 : Shooting outdoors in good weather
7: Shooting in shade
9 : Shooting under Daylight fluorescent lamps
0 : Shooting under Warm White fluorescent lamps
- : Shooting under Cool White fluorescent lamps
8 : Shooting in incandescent light
MEMO
• In [AUTO] mode, the correct white balance may not be
achieved for subjects such as close-ups of people’s
faces and pictures taken under a special light source.
Select the correct white balance for the light source.
• When the flash fires, the white balance setting for the
flash is used. Consequently, to achieve a particular
effect, the flash mode should be set to
[C SUPPRESSED FLASH] (
➝p.49).
• The color tones may vary depending on the shooting
conditions (light source, etc.).
• After taking the picture, check the image color (white
balance).
• Explanation of Terms “White Balance” (
➝p.124)
WHITE BALANCE
WHITE BALANCE
AUTO
AUTO
Setting the menu (
➝p.54)