Freestyle 901 - Manual

901 SHARK™ FLAME
WATCH INSTRUCTIONS
FEATURES:
• CURRENT TIME
(HR., MIN., & SEC.)
• DAY, DATE, MONTH
• CHRONOGRAPH
WITH SPLIT TIMER
• DAILY ALARM
• HOURLY CHIME
• OPTIONAL 24-HR.
TIME
• WATER RESISTANT
TO 330 FEET OR 100 METERS
• NIGHT VISION™
BACKLIGHT
To operate your FreeStyle® watch,
please follow these
instructions:
The term “MODE” refers to the
function status of the watch.) Normal
time mode shows hours, minutes,
seconds, and the day of the week.
To set time, see instructions below:
HOW TO SET NORMAL TIME,
CALENDAR & 24-HR. TIME
FORMAT
From “Normal Time” mode, press
and hold MODE button; alarm time
will flash. Press MODE button again;
seconds digits will flash.
Press LAP/SET button to reset the
seconds digits to “00.” If seconds
are greater than 30, one minute will
be added to the minutes display.
To set minutes, press START button.
The minutes digits will flash. To
advance minutes digits, press
LAP/SET button. Hold for rapid
advance.
To set hours, press START button.
Hours digits will flash. To advance
the hours, press LAP/SET button.
“A” for a.m. or “P” for p.m. will be
displayed.
To set the date, press START button.
Date will flash. To advance date,
press LAP/SET button.
HOW TO OPERATE THE
CHRONOGRAPH
To enter the chronograph mode,
press MODE button once from the
normal time mode.
To start (or stop) the chronograph
counting, Press START button.
Split time is the time elapsed since
the start of the chronograph.
To use the split time feature, press
the LAP/SET button while the
chronograph is counting.
Note: The chronograph will continue
to count while the split time is
displayed. To release split time mode
and continue counting, press
LAP/SET button. To stop
chronograph counting, press START
button. To reset the stopped
chronograph to zero, press
LAP/SET button.
HOW TO OPERATE THE NIGHT
VISION™ ELECTRO-
LUMINESCENT BACKLIGHT
To activate the Night Vision™
backlight, press LIGHT button. Light
will be on for about four seconds.
Do not press this button while the
watch is submerged in water.
CARE AND MAINTENANCE
1. Back case cover should only be
removed by an authorized watch
repair specialist.
2. Always rinse your watch in fresh
water after immersion in salt or
chlorinated water.
3. Do not expose watch or band to
chemicals such as gasoline,
aerosol sprays, paint or solvents.
4. Periodically clean with a soft cloth
and fresh water .
WARRANTY INFORMATION
Freestyle U.S.A. warrants, to the
original purchaser, that its watches
are free from defects in materials
and workmanship for a period of ten
(10) years under normal use. The
warranty excludes batteries, crystal,
watch case plating, and strap/
bracelet/ band. The warranty
excludes normal wear and tear
and abuse.
Special note: Freestyle ® watches
are designed and engineered to be
highly water-resistant, and to
withstand the most active of
lifestyles. The most important
component in keeping your watch
water-resistant is the case back O-
ring, which prevents water from
entering the watch through the case
back.
Water leakage most often occurs
after improper battery replacement.
We strongly recommend having a
certified jeweler, watch repair
technician or Freestyle's service
center replace your battery. Water
leakage due to improper battery
replacement is not covered under
warranty.
Should your Freestyle® watch
require warranty service, send it
along with the following:
1. A copy of your sales receipt
2. Your printed name and address
3. Your telephone number
4. A brief description of the problem
5. Please include $8.50 for
processing and handling, using
one of the following payment
methods:
-Check
-Money order
-Credit card (be sure to include
card number and expiration date)
REMEMBER: NEVER INCLUDE A
SPECIAL WATCHBAND OR ANY
OTHER PERSONAL ARTICLES
OF VALUE IN YOUR SHIPMENT.
Send to the following address:
Freestyle
Attn: Individual Returns
47-50 33rd Street
Long Island City, NY 11101
(718)-729-8890
Please allow 30 days for return of
your watch.
Neither this warranty, nor any other
warranty expressed, is assumed for
any incidental or consequential
damages, including but not limited
to the mathematical accuracy of the
product. Some states do not allow
limitations on how long an implied
warranty lasts, or the exclusions of
or limitations on consequential
damages, so the above limitations
may not apply to you. This warranty
gives you specific legal rights, and
you may have other rights which
vary from state to state.
This warranty applies to watches
purchased in the United States. For
watches purchased outside the
United States, please contact your
authorized Freestyle
® dealer for
warranty information.
If your watch requires servicing not
covered under our warranty (battery,
crystal, strap/bracelet/band, watch
case plating), or refurbishing,
complete the return form (next
column) and return with your watch.
To set the month, press the START
button. Month digit will flash. To
advance month digit, press
LAP/SET button. To set the day of
the week, press START button. The
day will flash. To advance the
desired day of the week, press
LAP/SET button.
At any time while setting your
FreeStyle® watch, you may press
MODE button to exit the setting
mode, and return to normal time
mode.
To change normal time to 24-hour
military time, press and hold
LAP/SET button, while
simultaneously pressing MODE
button. Release both buttons. The
“A” or “P” and AM or PM will
disappear when the 24-hour mode
is activated.
To check date while in
normal time mode, press START
button. To change date to European
format, press and hold START
button, while simultaneously
pressing LAP/SET button.
HOW TO SET AND OPERATE THE
ALARM AND HOURLY CHIME
To enter the alarm time setting
mode, press and hold MODE button.
Alarm hours will flash.
To advance the hours digits, press
LAP/SET button. “A” or “P” will be
displayed. “A” designates time is in
a.m.; “P” designates time is in p.m.
To set alarm minutes, press START
button. Minutes digits will flash. To
advance minutes digits, press
LAP/SET button. Hold for rapid
advance.
When the alarm time is set, press
MODE button to exit alarm time
setting mode and return to normal
time mode.
To view alarm time from the normal
time mode, press and hold LAP/SET
button. Alarm time will be displayed.
To activate the alarm and hourly
chime, press START button. This
will alternately activate and
deactivate the alarm ( ) and hourly
chime ( ). The sequence is:
=chime bell on
=chime and alarm on
=alarm only on
To return to normal time mode,
release the LAP/SET button.