Furuno NETCONTROLLER B042-008 - Manual (Page 39)

3. INITIAL SETTINGS
3-13
3.7 Restoring Default Settings
The procedure below restores most default settings. Are not affected: target setting,
language, demo mode, transducer settings, user color settings and user clutter settings.
1. Turn on the power and turn the [FUNCTION] switch to the MENU position.
2. Press [!] and [+] to select SYSTEM at the top of the screen.
3. Press ["] to select DEFAULT SETTING, and then press [+] key.
DISP ALM TX/RX E/S SYSTEM
DEFAULT SETTING
DEFAULT SET : NO
[-/+]: Change set, [EXIT]: Exit
4. Press [+] or [-] to open the dialog box.
[-]: NO [+]: YES
5. Press [+] to restore default settings.
6. Three beeps sound and then normal operation is restored.