Furuno NETCONTROLLER B042-008 - Manual (Page 25)

2. WIRING
2-3
2.2 Wiring Optional Equipment
Navigator
Use cable type MJ-A6SPF0011/0012 (option) to connect the navigator to the NMEA
connector.
Water temperature sensor T-02MSB, T-02MTB, T-03MSB
Connect the water temperature sensor cable to the TEMP connector.
2.3 Input/Output Sentences
Input sentences
Sentence Data Remarks
BWC Range/bearing to waypoint
GGA Time, position
GLC GRI, TD (Loran C)
GLL Latitude and longitude
GTD TD (Loran C)
MTW Water temperature
RMA Latitude and longitude, TD, ground speed and course by a LORAN-C receiver
RMB Recommended minimum navigation information
RMC Latitude and longitude, speed over ground and course over by a GPS
VHW True/magnetic bearing, speed through water Great circle
VTG Speed through the ground and course
XTE Cross track error
Output sentences
Sentences Talker Data Remarks
DBS SD Depth below sea surface Ver. 1.5
DBT SD Depth below transducer Ver. 1.5
DPT SD Depth below transducer Ver. 2.0
MTW YC Water temperature Ver. 1.5 Ver. 2.0 with connection of water
temperature sensor
TLL SD Marker line position Ver. 2.0
VRM SD VRM depth
VHW VW Ship’s speed