FUJITSU MAB3045 - Manual (Page 8)

C141-E035-03EN vii
DISCLAIMER
Failure of the MAA31xxxx, MAB30xxxx and MAC30xxxx series intelligent disk drive is defined as a
failure requiring adjustments, repairs, or replacement. Fujitsu is not responsible for drive failures
caused by misuse by the user, poor environmental conditions, power trouble, host problems, cable
failures, or any failure not caused by the drive itself.
The suffix of the model name of the disk drive varies depending on the electrical requirements,
capacity, and data format at factory shipment of the SCSI, i.e., the interface for connecting the three
device types or host system and the disk drives (Note 1). However, in this manual, the typical model
names (Note 2) are used unless otherwise noted. These disk drives may be called intelligent disk
drives (IDD), drives, or devices in this manual.
Note 1: Model names
M AA 3 182 SC
Interface types SP: Single-Ended, 16-bit SCSI
SC: Single-Ended, 16-bit SCSI SCA2 connector
Formatted capacity (100 MB units)
Disk size 3: 3.5 inch
Type AA: 1.6-inch height (7,200rpm)
AB: 1-inch height (7,200rpm)
AC: 1-inch height (10,033rpm)
Note 2: Type model name
Type model
name
Model name
MAA3182 MAA3182SP, MAA3182SC
MAB3091 MAB3091SP, MAB3091SC
MAB3045 MAB3045SP, MAB3045SC
MAC3091 MAC3091SP, MAC3091SC
MAC3045 MAC3045SP, MAC3045SC