FUJITSU PLASMAVISION P50XHA40U - Manual (Page 45)

E-31
English
Deutsch
Espa
ñol
Fran
ç
ais
Ital
iano
Portugu
ê
s
日 本 語
Póññêèé
中文
• Selecting the settings of Video/S-video Input terminal
You can use this option to select the color format appropriate for the input signal.
Each time you press E or F , one of the available modes appears in the following sequence:
[Auto1]: Automatically selects NTSC, PAL and SECAM.
[Auto2]: Automatically selects NTSC and M-PAL.
[Other than Auto]: You need to select a system appropriate to the input signal.
Press < to store.
• Selecting the settings of D-SUB Input terminal
You can use this option to select the signal system it will receive to D-SUB Input terminal.
(1) Select D-SUB Input and press < .
D-SUB Input screen appears.
(2) Select the signal system to receive.
Each time you press E or F , one of the available choices appears in the following sequence:
RGB-PC < Decoder
[RGB-PC]: For using RGB for PC
[Decoder]: For using digital broadcast tuner
(3) Press < to store.
SETTING THE INPUT TERMINALS
Input Terminal Settings Screen
Note
• The screen display disappears if there is no operation within approximately 60 seconds.
• Depending on the model or the optional devices, some of the functions may not be available.
• The adjustment range varies according to the display signals. Make adjustments to your preferred Sharpness within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
MHD01661-01_E.book 31 ページ ２００４年１１月１６日 火曜日 午後４時３３分