FUJITSU PLASMAVISION P50XHA40U - Manual (Page 42)

E-28
ADJUSTING AUDIO
• You can make changes to all audio adjustment options in the AUDIO Menu. See Page E-20 for the basic operation procedures.
• The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any
changes.
Adjusting Treble (Treble)
Press EF to make adjustments.
F : Stronger treble
E : Weaker treble
Press < to store.
Adjusting Bass (Bass)
Press EF to make adjustments.
F : Stronger bass
E : Weaker bass
Press < to store.
Adjusting Volume Balance (Balance)
Press EF to make adjustments.
F : Shifts the volume balance towards the right.
E : Shifts the volume balance towards the left.
Press < to store.
Setting Loudness (Loudness)
Corrects the balance between bass and treble for easy listening even with weak volume.
Each time you press E or F , one of the available choices appears in the following sequence:
On < Off
Press < to store.
AUDIO Menu screen
Note
• The screen display disappears if there is no operation within approximately 60 seconds.
• Depending on the model or the optional devices, some of the functions may not be available.
• The adjustment range varies according to the display signals. Make adjustments to your preferred Sharpness within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
• Audio Input menu will not be displayed when “No Audio” is selected. (See P. E-36.)
MHD01661-01_E.book 28 ページ ２００４年１１月１６日 火曜日 午後４時３３分