FUJITSU PRIMEPOWER B23Q8YA-G-02-F - Manual (Page 27)

21
Parameter Status Meaning
lp_10hdx_cap Read only Setting of link-partner
10Mbps/HalfDuplex, when link up
with AutoNegotiation.
0 : Invalid
1 : Valid
lp_100fdx_cap Read only Setting of link-partner
100Mbps/FullDuplex, when link up
with AutoNegotiation.
0 : Invalid
1 : Valid
lp_100hdx_cap Read only Setting of link-partner
100Mbps/HalfDuplex, when link up
with AutoNegotiation.
0 : Invalid
1 : Valid
lp_1000fdx_cap Read only Setting of link-partner
1000Mbps/FullDuplex, when link up
with AutoNegotiation.
0 : Invalid
1 : Valid
lp_1000hdx_cap Read only Setting of link-partner
1000Mbps/HalfDuplex, when link up
with AutoNegotiation.
0 : Invalid
1 : Valid
lp_pauseTX Read only Setting of link-partner transmit pause
frame, when link up with
AutoNegotiation.
0 : Invalid
1 : Valid
lp_pauseRX Read only Setting of link-partner receive pause
frame, when link up with
AutoNegotiation.
0 : Invalid
1 : Valid
lp_autoneg_cap Read only Setting of link-partner
AutoNegotiation, when link up with
AutoNegotiation.
0 : Invalid
1 : Valid
role_cap Read only The present Role setting, when
1000Mbps.
0 : Slave
1 : Master
jumbo Read only 0 : JumboFrame function is not used.
1 : JumboFrame function is used.
Notes
- Because of the specification of ndd utility, if two or more processes execute ndd command for a
fjgi interface at the same time, the value will be invalid.