HONDA GX390 - Manual (Page 16)

ENGLISH
Remote Control Linkage
Serial Number Location
Battery Connections for Electric Starter (applicable types)
Recommended Battery
TECHNICAL INFORMATION
POSITIVE ( ) BATTERY CABLE
NEGATIVE ( )
BATTERY CABLE
REMOTE THROTTLE LINKAGE
Flexible wire core
mounting
Solid wire core
mounting
WIRE
5 mm
CIRCLIP
4 mm SCREW
WIRE HOLDER
THROTTLE
LEVER
OPTIONAL
REMOTE CHOKE LINKAGE
SERIAL NUMBER &
ENGINE TYPE LOCATION
RETURN SPRING
WIRE HOLDER CHOKE LEVER
THROTTLE LEVER
FRICTION NUT
ELECTRIC STARTER
(applicable types)
STARTER
SOLENOID
16
The throttle and choke control levers are provided with holes for
optional cable attachment. The following illustrations show
installation examples for a solid wire cable and for a flexible,
braided wire cable. If using a flexible, braided wire cable, add a
return spring as shown.
It is necessary to loosen the throttle lever friction nut when
operating the throttle with a remote-mounted control.
Record the engine serial
number in the space below. You
will need this information when
ordering parts and when
making technical or warranty
inquiries.
Engine serial number: __ __ __ __ __ __ __ __ __ __ __
Engine type: ___ ___ ___ ___
Date Purchased: ______ / ______ / ______
12 V 14 Ah 12 V 30 Ah
12 V 18 Ah 12 V 30 Ah
Be careful not to connect the battery in reverse polarity, as this will
short circuit the battery charging system. Always connect the
positive (
) battery cable to the battery terminal before
connecting the negative ( ) battery cable, so your tools cannot
cause a short circuit if they touch a grounded part while tightening
the positive (
) battery cable end.
A battery can explode if you do not follow the correct
procedure, seriously injuring anyone nearby.
Keep all sparks, open flames, and smoking materials
away from the battery.
WARNING: Battery posts, terminals, and related accessories
contain lead and lead compounds. Wash hands after handling.
Connect the battery positive ( ) cable to the starter solenoid
terminal as shown.
Connect the battery negative (
) cable to an engine mounting
bolt, frame bolt, or other good engine ground connection.
Connect the battery positive (
) cable to the battery positive ( )
terminal as shown.
Connect the battery negative (
) cable to the battery negative
( ) terminal as shown.
Coat the terminals and cable ends with grease.
1.
2.
3.
4.
5.
GX270
GX390
07/10/25 14:43:18 32Z5F600_016