Hitachi P50V701 - Manual (Page 70)

70
Setup
O
n
-S
c
re
e
n
D
is
p
la
y
8. Use the CURSOR PAD
̇ or ̈ to choose the
brand name of your DVD.
9. Press the CURSOR PAD ̄ to highlight the IR
CODE Set, then use the CURSOR PAD
̇ or ̈
to choose the preset IR Code.
10. Use the CURSOR PAD
̄ to highlight the
" POWER ” Test button.
These On-screen buttons are called “ Soft
Keys ”.
11. Press the SELECT button to pass the Power
command through the IR Blaster and onto the
DVD.
( Repeat steps 9 to 11 until finding the IR code
that will power up the DVD. If the DVD turns
ON, then you have found the correct preset
IR code ).
12. Use the CURSOR PAD ̇, ̈, ̆ and ̄ to
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
13. Use the CURSOR PAD ̇ or ̈ to select the TV
Input that connects the DVD video output and
then the TV input for the DVD audio output.
14. Use the CURSOR PAD ̇, ̈, ̆ and ̄ to
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
15. Confirm all settings, then press the SELECT
button to move on to the next SETUP screen.
16. Press the SELECT button to select YES to
Setup another device. Press the CURSOR
PAD
̇ or ̈ to highlight “ No thanks, I'm done
“, then press the SELECT button to exit the
AV NET SETUP.
Learning Mode
This function of the AV NET allows the user to use
equipment that is not precoded in the AV NET codes.
After programming your equipment to the AV NET and
the Soft Keys do not work, you can manually “LEARN”
each one by completing the Learning Mode. The
Learning Mode will transfer any remote control button
IR code of your equipment to the “Soft Keys” of your
AV NET.
Learning Mode (Example: A/V Receiver
Setup)
1. Press the SELECT button to start the SETUP
WIZARD.
2. Use the CURSOR PAD ̆ or ̄ to highlight
YES.
3. Press the SELECT button to select.
4. Use the CURSOR PAD
̇, ̈, ̆ and ̄ to
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
IR Code Set
Audio Input Not Connected
1 (1/5)
Brand Name Hitachi
Video Input Not Connected
(26/77)
AV Net Setup Wizard : Device Settings
Move
All settings are complete!
Next Back
SEL Select
DVD Settings
Congratulations!
Your DVD is now
connected to your AV network.
AV Net Setup Wizard : Device Settings
Move
Would you like to setup another device?
Yes No thanks, I’mdone.
SEL Select
Welcome to the AV Net Setup Wizard.
Before starting this wizard, please make sure
that all devices are connected appropiately
and the IR blasters are placed in front of the
devices IR sensor.
AV Net Setup Wizard
Move SEL Return
Back Start
Do you want to use an A/V Receiver?
Yes
No
AV Net Setup Wizard : A/V Receiver Setup
Move SEL Select
Back Next
DVD Settings
IR Code Set
Test Button
Transmission Test
1 (1/5)
Brand Name Hitachi (26/77)
AV Net Setup Wizard : Device Settings
Move Change Brand Name
Back Next
POWER CH
DVD Settings
IR Code Set
Inputs settings
1 (1/5)
Brand Name Hitachi (26/77)
AV Net Setup Wizard : Device Settings
Move Change Source
Back Next
Select SEL
Video Input Not Connected
Audio Input Not Connected