7. leveling of unit, 8. electrical requirements – Henny Penny SCR-6/8 User Manual
Page 15
SCR-6/8
2-7. LEVELING OF UNIT
For proper operation, the rotisserie should be level from side to side
and front to back. This will ensure proper door operation.
2-8. ELECTRICAL
The Henny Penny Rotisserie is available from the factory, wired
REQUIREMENTS
for 208 or 240 volt, 220-380 volt, 240-415 volt, 230-400
volt, 1 or 3 phase, 50/60 hertz service.
This unit must be adequately and safely grounded.
Refer to local electrical codes for correct grounding
procedures. If unit is not adequately grounded, electri-
cal shock could result.
Model Volts Phase Amps Watts Wire
No.
SCR-8
208
3
33.6
11,100
3+G
208
1
50.5
11,100
2+G
240
3
29.1
11,100
3+G
240
1
46
11,100
2+G
400
3
19.3
11,000
4+G
SCR-6
208
3
22.8
6800
3+G
208
1
32.5
6800
2+G
240
3
19.7
6800
3+G
240
1
28.3
6800
2+G
400
3
13.5
6800
4+G
303
2-7