Hearth and Home Technologies Yosemite PMH - Manual (Page 5)

Page 5
Yosemite Wood Stove
7004-187F September 1, 2008
R
DIMENSIONS
FRONT VIEW
SIDE VIEW
VENT SPECIFICATIONS:
Single Wall: Measures 6 inch (152mm) diameter, minimum 24 MSG black or blued steel connector pipe, with a listed
factory-built chimney type UL103 HT* suitable for use with solid fuels, or a masonry chimney, and the referenced
clearances.
Double Wall/Mobile Home: Measures 6 inch (152mm) diameter, listed double wall air insulated connector pipe with listed
factory-built UL103 HT* Class “A” chimney, or a masonry chimney (Mobile Home must be equipped with a spark arrestor),
and the referenced clearances. Use only double-wall connector pipe, Dura-Vent DVL, Selkirk metalbestos DS, Security DL
double wall connector or any listed double-wall connector pipe.
*In Canada must comply with CAN/ULC-S629 for the 650° C Factory-built chimney.
SAFETY/SERIAL NUMBER LABEL IS LOCATED ON THE BACK OF THE STOVE
TOP VIEW
8-1/4"
(210mm)
16-3/4"
(426mm)
25-5/8"
(651mm)
25-5/16"
(643mm)
13.0"
(230mm)
19-7/16"
(494mm)
SIDE VIEW WITH FUEL DOOR
22-7/16"
(570mm)
C
L
19-5/16"
(491mm)
20-7/16"
(519mm)
24-5/16"
(618mm)
5-1/2"
(140mm)
8-5/16"
(211mm)
25-1/2"
(648mm)
14.0"
(356mm)
25.0"
(635mm)
14.0"
(356mm)
C
L
14-15/16"
(379mm)
C
L
14-15/16"
(379mm)
TOP VIEW REAR VENT
16-5/16"
(414mm)