Hearth and Home Technologies 299-900D User Manual

Heat-zone-240v air duct kit, Approvals, Introduction

Hearth & Home Technologies • Heat-Zone-240V Air Duct Kit • 299-900D • 7/10

FLOOR REGISTER

TWO DUCT KITS

WALL REGISTER

CEILING REGISTER

Hearth Technologies, Inc.

7571 215

Street West

Lakeville, MN 55044 USA

Figure 1

Possible Air Duct Runs/Locations

INSTALLATION AND
OPERATION INSTRUCTIONS

Approvals

The HEAT-ZONE-240V air duct kit is approved for use on
Heat & Glo Models XLR-AU, 6000, 350 and 550 series
gas heaters.

Introduction

The HEAT-ZONE-240V accessory kit conveys warm air
from the heater through air duct(s) to remote locations
in the same room or other rooms of the building. See
Figures 1 and 2. One or two HEAT-ZONE-240V kits can
be installed on the heater.

Preliminary Preparation

1. Contents of kit:

• 6 meters of 152 mm round duct

• Fan housing assembly

• Junction box

• Air register

• Register adapter frame

• Heater duct collar

• Duct adapter - (round to oval)

• Hardware

• 2166-191 IPI Plus auxiliary jumper

Heat-Zone-240V Air Duct Kit

NOTICE! If any parts are missing or damaged, contact your
dealer before starting installation. DO NOT install a damaged kit.