Honeywell PCR-110 - Manual (Page 13)

10 Conditions of warranty
¼ Warranty is provided for a period of 24 months, starting at the
date the item was delivered. Proof of this should be furnished in
the form of a delivery note or invoice.
¼ All functional faults caused by poor workmanship or faulty
materials will be repaired free of charge during the warranty
period.
¼ More extensive claims, in particular for consequential damage, are
excluded.
¼ Damage or malfunctioning caused by the equipment being hand-
led incorrectly or by non-compliance with the operating instruc-
tions shall not be covered by the warranty.
The warranty shall be invalidated if any work is carried out
on the appliance.
11 Technical data
Mains voltage/frequency: 230 V AC ± 10%, 50/60 Hz
Rated wattage: 2.1 watts
Display: 3-digit, 7-segment LED, red, 14.2 mm
Resolution: 1 K
Measuring range: –55 to +50 °C
Outputs: 1 relay with changeover contact,
8 A, 230 V AC, resistive load
1 relay with N.O. contact,
5 A, 230 V AC, resistive load,
(alarm)
Caution: For PCR-110 the total current via the common relay
connection, terminal no. 5, must not exceed 10 A.
13