HP mp3320 - Manual (Page 40)

40 User’s Guide
Adjusting the Projector
Adjust picture menu
Adjust picture
Picture mode Adjusts the color settings for the type of picture. You
can optimize the picture for computer presentations
or video output. The remote control and projector
have buttons to change the picture mode.
Adjust picture mode... Changes settings that define the current picture
mode.
White intensity Sets the brightness of white areas.
Picture enhancement Refines the color, lightness, and other characteristics
of the picture.
Color temperature Shifts colors toward red or blue.
Aspect ratio Selects the proportions of the image that is not
automatically corrected by the projector.
• To automatically adapt to most inputs, select
Best Fit.
• To stretch the picture to cover the entire projection
area, select Fill.
• To show each picture dot as one projected dot,
select 1-to-1.
If the input source is a widescreen device, go to
Adjust picture > Shape settings >
Widescreen input.
Reset this picture mode Resets the current picture mode to its default settings.
Color settings... Adjusts the picture and colors.
Brightness Brightens or darkens the image.
Contrast Sets the difference between light and dark areas.
Sharpness Sharpens or softens the image.
Color saturation Adjusts the intensity of colors.