HP Photosmart 620 Series - Manual (Page 50)

48 hp photosmart 620 user’s manual
My image is My image is My image is My image is
too bright. too bright. too bright. too bright.
The flash
provided too
much light.
Change the flash setting to Flash Flash Flash Flash
Off Off Off Off .
A natural or
artificial
source other
than the flash
provided too
much light.
Try taking the picture from a
different angle. Avoid pointing
the camera directly toward a
bright light or reflective surface
on a sunny day.
You were too
close to the
subject to use
the flash.
Move back from the subject or
set the flash to Flash Off Flash Off Flash Off Flash Off and
take the picture again.
Problem Possible cause Solution