HP Photosmart 620 Series - Manual (Page 42)

40 hp photosmart 620 user’s manual
3 Turn on the camera. The HP Image Unload software will
launch on your computer, and the images in the camera will
automatically unload to the computer. If there were any
images in the camera that were selected in the Share Share Share Share menu
for printing or e-mail, those actions are started after the
images have been unloaded to the computer.
4 When the unload screen on the computer says Finished Finished Finished Finished ,
your images have been saved and shared. You can now
disconnect the camera from the computer.
NOTE To unload the camera images to a computer that does
not have the HP Photo & Imaging software installed on it,
switch the camera to Disk Drive Disk Drive Disk Drive Disk Drive in the USB Configuration USB Configuration USB Configuration USB Configuration
menu found in the Setup Setup Setup Setup menu. This allows the camera to
appear as another disk drive on the computer.
Printing images
NOTE You can also use the optional HP Camera Dock to do
this task. See Appendix B: Appendix B: Appendix B: Appendix B: Camera dock Camera dock Camera dock Camera dock on page 65.
To print images that have been unloaded to the computer, you
can use the HP Photo & Imaging software that was shipped
with the camera.
You can also connect the camera directly to any HP DeskJet or
Photosmart printer that has a USB connection, then print
images selected from the camera’s Share Share Share Share menu or all images
in the camera.